Our HPE7-A01 exam questions are so excellent for many advantages. Firstly, the quality of our HPE7-A01 learning braindumps is very high. You may think that our HPE7-A01 training materials can only help you to start with confidence, but in fact, they cover the real exam questions and answers. And the accuracy of them will let you surprised. Secondly, the prices for the HPE7-A01 learning prep are really favorable for every candidate. Even the students can afford it.
HPE7-A01 certification exam is intended for IT professionals who have experience working with Aruba wireless networking solutions. Candidates should have experience with configuring and troubleshooting Aruba wireless access points, as well as experience with configuring and managing the ArubaOS operating system. Candidates should also have experience with network design and network management.
HP HPE7-A01 certification exam is designed to assess the skills and knowledge of professionals who are responsible for designing and implementing secure wireless solutions in campus environments. HPE7-A01 Exam is part of the Aruba Certified Mobility Professional (ACMP) certification track and is a prerequisite for achieving the Aruba Certified Mobility Expert (ACMX) certification. The HPE7-A01 exam covers a range of topics, such as wireless fundamentals, implementation and configuration of Aruba WLAN solutions, and troubleshooting techniques.
>> Regualer HPE7-A01 Update <<
As is known to us, our company is professional brand established for compiling the HPE7-A01 study materials for all candidates. The HPE7-A01 study materials from our company are designed by a lot of experts and professors of our company in the field. We can promise that the HPE7-A01 Study Materials of our company have the absolute authority in the study materials market. We believe that the study materials designed by our company will be the most suitable choice for you.
NEW QUESTION # 108
Match the topics of an AOS10 Tunneled mode setup between an AP and a Gateway. (Options may be used more than once or not at all.)
Answer:
Explanation:
NEW QUESTION # 109
Which method is used to onboard a new UXI in an existing environment with 802.1X authentication? (The sensor has no cellular connection)
Answer: A
Explanation:
To onboard a new UXI in an existing environment with 802.1X authentication, you need to use the UXI app on your smartphone and connect the UXI via Bluetooth. The UXI app allows you to scan the QR code on the UXI sensor and configure its network settings, such as SSID, password, IP address, etc. The Bluetooth connection allows you to communicate with the UXI sensor without requiring any network access or cellular connection. The other options are incorrect because they either do not use the UXI app or do not use Bluetooth.
NEW QUESTION # 110
A new network design is being considered to minimize client latency in a high-density environment. The design needs to do this by eliminating contention overhead by dedicating subcarriers to clients.
Which technology is the best match for this use case?
Answer: A
Explanation:
OFDMA (Orthogonal Frequency Division Multiple Access) is a technology that can minimize client latency in a high-density environment by eliminating contention overhead by dedicating subcarriers to clients. OFDMA allows multiple clients to transmit simultaneously on different subcarriers within the same channel, reducing contention and increasing efficiency. MU-MIMO (Multi-User Multiple Input Multiple Output) is a technology that allows multiple clients to transmit simultaneously on different spatial streams within the same channel, but it does not eliminate contention overhead. QWMM (Quality of Service Wireless Multimedia) is a technology that prioritizes traffic based on four access categories, but it does not eliminate contention overhead. Channel Bonding is a technology that combines two adjacent channels into one wider channel, increasing bandwidth but not eliminating contention overhead. Reference: https://www.arubanetworks.com/assets/ds/DS_AP510Series.pdf https://www.arubanetworks.com/assets/wp/WP_WiFi6.pdf
NEW QUESTION # 111
You are configuring Policy Based Routing (PBR) for a subnet that will be used to test a new default route for your network Traffic originating from 10.2.250.0/24 should use a new default route to 10.1.1.253. Other non-default routes for this subnet should not be affected by this change.
What are two parts of the solution for these requirements? (Select two.)
Answer: C,D
Explanation:
Explanation
These are the correct parts of the solution for the requirements of configuring Policy Based Routing (PBR) for a subnet that will be used to test a new default route for your network. Option A defines a PBR policy named test-default-route with a rule named new-default-route that matches traffic from source IP address
10.2.250.0/24 and sets the next hop IP address to 10.1.1.253. Option E applies the PBR policy to VLAN 10 interface, which is the subnet that needs to use the new default route. The other options are incorrect because they either do not match the correct traffic or do not set the correct next hop. References:
https://www.arubanetworks.com/techdocs/AOS-CX/10.04/HTML/5200-6728/bk01-ch02.html
https://www.arubanetworks.com/techdocs/AOS-CX/10.04/HTML/5200-6728/bk01-ch03.html
NEW QUESTION # 112
Your Aruba CX 6300 VSF stack has OSPF adjacency over SVI 10 with LAG 1 to a neighboring device The following configuration was created on the switch:
Answer: B
Explanation:
Explanation
The correct configuration for OSPF adjacency over SVI 10 with LAG 1 to a neighboring device is shown in Option C. The configuration includes the following steps:
* Create a VLAN 10 and assign it a name and an IP address.
* Create a LAG 1 and assign it a name and a mode of dynamic or static.
* Add member ports to LAG 1 and enable the LAG interface.
* Assign VLAN 10 as the untagged VLAN for LAG 1.
* Enable OSPF on the switch and assign it a router ID.
* Create an OSPF area 0 and add SVI 10 as an interface in that area.
Option A is incorrect because it does not enable OSPF on the switch or create an OSPF area. Option B is incorrect because it assigns VLAN 10 as the tagged VLAN for LAG 1, which is not compatible with SVI 10.
Option D is incorrect because it does not add member ports to LAG 1 or enable the LAG interface.
References:
https://techhub.hpe.com/eginfolib/Aruba/OS-CX_10.04/5200-6692/GUID-BD3E0A5F-FE4C-4B9B-BE1D-FE7D
https://techhub.hpe.com/eginfolib/Aruba/OS-CX_10.04/5200-6692/GUID-BD3E0A5F-FE4C-4B9B-BE1D-FE7D
NEW QUESTION # 113
......
RealValidExam is committed to offering the real and valid Aruba Certified Campus Access Professional Exam HPE7-A01 exam questions in three easy-to-use and compatible formats. These formats are HP PDF Questions files, desktop practice test software, and web-based HPE7-A01 practice test software. All these three HPE7-A01 exam dumps formats contain the real and updated HPE7-A01 Practice Test questions and are verified by qualified HPE7-A01 exam experts. So you do not need to get worried about it choose the right RealValidExam HPE7-A01 exam questions formats and start this journey without wasting further time.
Test HPE7-A01 Questions Pdf: https://www.realvalidexam.com/HPE7-A01-real-exam-dumps.html